Systems of Measurement

Make Unit Conversions in the U.S. System

There are two systems of measurement commonly used around the world. Most countries use the metric system. The United States uses a different system of measurement, usually called the U.S. system. We will look at the U.S. system first.

The U.S. system of measurement uses units of inch, foot, yard, and mile to measure length and pound and ton to measure weight. For capacity, the units used are cup, pint, quart and gallons. Both the U.S. system and the metric system measure time in seconds, minutes, or hours.

The equivalencies among the basic units of the U.S. system of measurement are listed in Table 7.2. The table also shows, in parentheses, the common abbreviations for each measurement.

In many real-life applications, we need to convert between units of measurement. We will use the identity property of multiplication to do these conversions. We’ll restate the Identity Property of Multiplication here for easy reference.

To use the identity property of multiplication, we write $1$ in a form that will help us convert the units. For example, suppose we want to convert inches to feet. We know that $1$ foot is equal to $12$ inches, so we can write $1$ as the fraction $\frac{\text{1 ft}}{\text{12 in}}.$ When we multiply by this fraction, we do not change the value but just change the units.

But $\frac{\text{12 in}}{\text{1 ft}}$ also equals $1.$ How do we decide whether to multiply by $\frac{\text{1 ft}}{\text{12 in}}$ or $\frac{\text{12 in}}{\text{1 ft}}?$ We choose the fraction that will make the units we want to convert from divide out. For example, suppose we wanted to convert $60$ inches to feet. If we choose the fraction that has inches in the denominator, we can eliminate the inches.

On the other hand, if we wanted to convert $5$ feet to inches, we would choose the fraction that has feet in the denominator.

We treat the unit words like factors and ‘divide out’ common units like we do common factors.

When we use the Identity Property of Multiplication to convert units, we need to make sure the units we want to change from will divide out. Usually this means we want the conversion fraction to have those units in the denominator.

Example 7.45

Ndula, an elephant at the San Diego Safari Park, weighs almost $3.2$ tons. Convert her weight to pounds.

Figure 7.5 (credit: Guldo Da Rozze, Flickr)

Show solution

Solution

We will convert $3.2$ tons into pounds, using the equivalencies in Table 7.2. We will use the Identity Property of Multiplication, writing $1$ as the fraction $\frac{\text{2000 pounds}}{\text{1 ton}}.$

	$\text{3.2 tons}$
Multiply the measurement to be converted by 1.	$\text{3.2 tons}·1$
Write 1 as a fraction relating tons and pounds.	$\text{3.2 tons}·\frac{\text{2000 lbs}}{\text{1 ton}}$
Simplify.	$\frac{3.2\cancel{\text{tons}}·\text{2000 lbs}}{1\cancel{\text{ton}}}$
Multiply.	$\text{6400 lbs}$
	Ndula weighs almost 6,400 pounds.

Sometimes to convert from one unit to another, we may need to use several other units in between, so we will need to multiply several fractions.

Example 7.46

Juliet is going with her family to their summer home. She will be away for $9$ weeks. Convert the time to minutes.

Show solution

Solution

To convert weeks into minutes, we will convert weeks to days, days to hours, and then hours to minutes. To do this, we will multiply by conversion factors of $1.$

	$\text{9 weeks}$
Write 1 as $\frac{7\text{days}}{1\text{week}},\frac{24\text{hours}}{1\text{day}},\frac{60\text{minutes}}{1\text{hour}}$.
Cancel common units.
Multiply.	$\frac{9·7·24·60\text{min}}{1·1·1·1}=90,720\text{min}$
	Juliet will be away for 90,720 minutes.

Example 7.47

How many fluid ounces are in $1$ gallon of milk?

Figure 7.6 (credit: www.bluewaikiki.com, Flickr)

Show solution

Solution

Use conversion factors to get the right units: convert gallons to quarts, quarts to pints, pints to cups, and cups to fluid ounces.

	1 gallon
Multiply the measurement to be converted by 1.	$\frac{\text{1 gal}}{1}·\frac{\text{4 qt}}{\text{1 gal}}·\frac{\text{2 pt}}{\text{1 qt}}·\frac{\text{2 C}}{\text{1 pt}}·\frac{\text{8 fl oz}}{\text{1 C}}$
Simplify.	$\frac{1\cancel{\text{gal}}}{1}·\frac{4\cancel{\text{qt}}}{1\cancel{\text{gal}}}·\frac{2\cancel{\text{pt}}}{1\cancel{\text{qt}}}·\frac{2\cancel{\text{C}}}{1\cancel{\text{pt}}}·\frac{\text{8 fl oz}}{1\cancel{\text{C}}}$
Multiply.	$\frac{1·4·2·2·\text{8 fl oz}}{1·1·1·1·1}$
Simplify.	128 fluid ounces
	There are 128 fluid ounces in a gallon.

Use Mixed Units of Measurement in the U.S. System

Performing arithmetic operations on measurements with mixed units of measures requires care. Be sure to add or subtract like units.

Example 7.48

Charlie bought three steaks for a barbecue. Their weights were $14$ ounces, $1$ pound $2$ ounces, and $1$ pound $6$ ounces. How many total pounds of steak did he buy?

Figure 7.7 (credit: Helen Penjam, Flickr)

Show solution

Solution

We will add the weights of the steaks to find the total weight of the steaks.

Add the ounces. Then add the pounds.
Convert 22 ounces to pounds and ounces.
Add the pounds.	2 pounds + 1 pound, 6 ounces 3 pounds, 6 ounces
	Charlie bought 3 pounds 6 ounces of steak.

Example 7.49

Anthony bought four planks of wood that were each $6$ feet $4$ inches long. If the four planks are placed end-to-end, what is the total length of the wood?

Show solution

Solution

We will multiply the length of one plank by $4$ to find the total length.

Multiply the inches and then the feet.
Convert 16 inches to feet.	24 feet + 1 foot 4 inches
Add the feet.	25 feet 4 inches
	Anthony bought 25 feet 4 inches of wood.

Make Unit Conversions in the Metric System

In the metric system, units are related by powers of $10.$ The root words of their names reflect this relation. For example, the basic unit for measuring length is a meter. One kilometer is $1000$ meters; the prefix kilo- means thousand. One centimeter is $\frac{1}{100}$ of a meter, because the prefix centi- means one one-hundredth (just like one cent is $\frac{1}{100}$ of one dollar).

The equivalencies of measurements in the metric system are shown in Table 7.3. The common abbreviations for each measurement are given in parentheses.

To make conversions in the metric system, we will use the same technique we did in the U.S. system. Using the identity property of multiplication, we will multiply by a conversion factor of one to get to the correct units.

Have you ever run a $\text{5 k}$ or $\text{10 k}$ race? The lengths of those races are measured in kilometers. The metric system is commonly used in the United States when talking about the length of a race.

Example 7.50

Nick ran a $\text{10-kilometer}$ race. How many meters did he run?

Figure 7.8 (credit: William Warby, Flickr)

Show solution

Solution

We will convert kilometers to meters using the Identity Property of Multiplication and the equivalencies in Table 7.3.

	10 kilometers
Multiply the measurement to be converted by 1.
Write 1 as a fraction relating kilometers and meters.
Simplify.
Multiply.	10,000 m
	Nick ran 10,000 meters.

Example 7.51

Eleanor’s newborn baby weighed $3200$ grams. How many kilograms did the baby weigh?

Show solution

Solution

We will convert grams to kilograms.

Multiply the measurement to be converted by 1.
Write 1 as a fraction relating kilograms and grams.
Simplify.
Multiply.
Divide.	3.2 kilograms
	The baby weighed $3.2$ kilograms.

Since the metric system is based on multiples of ten, conversions involve multiplying by multiples of ten. In Decimal Operations, we learned how to simplify these calculations by just moving the decimal.

To multiply by $10,100,\text{or}1000,$ we move the decimal to the right $1,2,\text{or}3$ places, respectively. To multiply by $0.1,0.01,\text{or}0.001$ we move the decimal to the left $1,2,\text{or}3$ places respectively.

We can apply this pattern when we make measurement conversions in the metric system.

In Example 7.51, we changed $3200$ grams to kilograms by multiplying by $\frac{1}{1000}(\text{or}0.001).$ This is the same as moving the decimal $3$ places to the left.

Example 7.52

Convert:

1. ⓐ$350$ liters to kiloliters
2. ⓑ$4.1$ liters to milliliters.

Show solution

Solution

ⓐ We will convert liters to kiloliters. In Table 7.3, we see that $\text{1 kiloliter}=\text{1000 liters}.$

	350 L
Multiply by 1, writing 1 as a fraction relating liters to kiloliters.
Simplify.
Move the decimal 3 units to the left.
	0.35 kL

ⓑ We will convert liters to milliliters. In Table 7.3, we see that $\text{1 liter}=1000\text{milliliters.}$

	4.1 L
Multiply by 1, writing 1 as a fraction relating milliliters to liters.
Simplify.
Move the decimal 3 units to the left.
	4100 mL

Use Mixed Units of Measurement in the Metric System

Performing arithmetic operations on measurements with mixed units of measures in the metric system requires the same care we used in the U.S. system. But it may be easier because of the relation of the units to the powers of $10.$ We still must make sure to add or subtract like units.

Convert Between U.S. and Metric Systems of Measurement

Many measurements in the United States are made in metric units. A drink may come in $\text{2-liter}$ bottles, calcium may come in $\text{500-mg}$ capsules, and we may run a $\text{5-K}$ race. To work easily in both systems, we need to be able to convert between the two systems.

Table 7.4 shows some of the most common conversions.

We make conversions between the systems just as we do within the systems—by multiplying by unit conversion factors.

The conversion factors in Table 7.4 are not exact, but the approximations they give are close enough for everyday purposes. In Example 7.55, we rounded the number of fluid ounces to the nearest tenth.

Convert Between Fahrenheit and Celsius Temperatures

Have you ever been in a foreign country and heard the weather forecast? If the forecast is for $22\text{°C}.$ What does that mean?

The U.S. and metric systems use different scales to measure temperature. The U.S. system uses degrees Fahrenheit, written $\text{°F}.$ The metric system uses degrees Celsius, written $\text{°C}.$ Figure 7.9 shows the relationship between the two systems.

Figure 7.9 A temperature of $37\text{°C}$ is equivalent to $98.6\text{°F}.$

If we know the temperature in one system, we can use a formula to convert it to the other system.

Example 7.57

Convert $50\text{°F}$ into degrees Celsius.

Show solution

Solution

We will substitute $50\text{°F}$ into the formula to find $\text{C}.$

Use the formula for converting °F to °C	$C=\frac{5}{9}(F-32)$
Simplify in parentheses.	$C=\frac{5}{9}(18)$
Multiply.	$C=10$
	A temperature of 50°F is equivalent to 10°C.

Example 7.58

The weather forecast for Paris predicts a high of $20\text{°C.}$ Convert the temperature into degrees Fahrenheit.

Show solution

Solution

We will substitute $20\text{°C}$ into the formula to find $\text{F}.$

Use the formula for converting °F to °C	$F=\frac{9}{5}C+32$
Multiply.	$F=36+32$
Add.	$F=68$
	So 20°C is equivalent to 68°F.